Facebook

Login

Support Sailonline

If you haven't already - join the SAILONLINE YACHT CLUB!

Please also consider making a donation - all amounts are greatly appreciated!

Board » Technical Support » qtVlm thread

Page: First Previous 27 28 29 30 31 32 33 Next

Posted by
Zorba777


Users avatar

Posts
67
Registered at
2020-06-06 08:22:54
2020-10-02 08:55:45 - Re: qtVlm thread
Hi Satori. I liked your Rum Run report. Figuring out how to squeeze a little bit more out of QtVlm routing is part of the fun for some of us. I think you are on the right track with your experiments. I am still learning too, but some of the things I try are:
1) Using barriers is a good way to force the routing to go around a buoy, or to close off possible paths that lead nowhere (like dead end fjords) and thus made the routing faster.
2) Another way to optimize/simplify faster is by using the "Selection" tool (blue square icon) and only optimize/simplify on that selected part. Much faster, especially on multi-day routings.
3) Watching the isochrones unfold during a routing is important to spot tactical alternatives. I mark them with waypoints and then do separate routings from boat to those waypoints to see how much they differ in time and to see which routes are improving (or getting worse) on subsequent WX updates.
4) As you pointed out in your report, with tallship polars QtVlm can sometimes struggle with the polar hops. You can then see the isochrones behave strangely and may even fall apart completely. Then you have a very unreliable routing. In that case try to route again with longer steps.
5) Varying the step can also give you routes that optimize better. 30 minutes or even 1 hour steps will sometimes give you quicker routes that a routing with 5 minute steps didn't find. Experiment.
6) It's also important to verify. Your boat position after 4 or 5 hours should be very close to where your used routing indicates it should be. If not you may be on wrong polar or be using an out of date grib. Both have happened many times to me. Checking where my boat is helps me to spot those problems.
7) When the routing tackes/gybes a lot it is often useful to adjust the route manually, before simply/optimize. Reduce the number of tacks/gybes can give you a faster ETA.

Good luck.
Posted by
dtayls


Users avatar

Posts
30
Registered at
2014-06-23 03:34:16
2020-10-03 04:41:53 - Re: qtVlm thread
Interesting. I wasn't aware of the 'selection tool'. I'll have to give it a go.
Posted by
Zorba777


Users avatar

Posts
67
Registered at
2020-06-06 08:22:54
2020-10-26 15:07:51 - Re: qtVlm thread
@Satori Another great race report for the recent Hatteras Sprint. I have had a busy week, so here are my belated comments to some of the points you raise about Qt routing.

It's important to experiment with some settings and find what works for you. This may vary depending on the boat polar and on the type of race.
I always set my crank duration to 1 minute for max accuracy. Simplify/optimize the route will reduce the number of DCs anyway.

In the boat settings for "tacks and gybes" is where many SOLers probably use very different values. This is the part where Qt is the least accurate because the PL loss formula in SOL differs from what Qt does. I prefer to set both tacks and gybes to 97% of polar speed for only 1 crank. In reality, depending on the wind speeds, my PL penalty will be more than that. But I will take that into account when I clean up my route. With those settings I know it will tack and gybe more often than needed. I manually improve my route when it has lots of tacks, as was the case in first part of the race here.
I just tacked manually going on max VMG, and I didn't use the intermediate tack to try to limit PL. In this case the boat speed was mostly around 7 kts. My PL always recovered to 100% within 1 or 2 server updates. Then I don't believe you can gain much by going on a lower speed for 10-20 seconds. That's like giving yourself a 30% performance penalty for 1 or 2 server updates. That doesn't pay off.
At boat speeds of >12kts it becomes another matter.

Where the router was very helpful (and will usually beat sotp navigation) is in the curved passages we had just before and after Hatteras inlet. I believe that's where I gained some time on most of the other boats. This are the type of passages where you can let the wind steer your boat without getting any PL. That's what I did here. I kept switching between COG and TWA to turn my boat to the wanted COG directions.
At Cape Hatteras turn it was of course straightforward, no router needed. Being only 0.01 NM behind I knew there was a chance to win by taking a bit more risk.
What I do there is set a DC that will turn about 10-12 seconds after the Cape. But at the same time I am ready to turn my boat a little bit earlier with a direct command. In this case I probably pushed the command about 8 seconds before the DC would have fired, when I eyeballed my boat to be right at the corner. That put me on inside with a slightly better angle.

It is really small differences that decide this kind of races. You have to squeeze out every inch you can, because many others are doing the same.

For short races like this one I route with 5 minute step. In longer ocean races I usually do 15 or even 30 minute steps. But it is important to test and compare with other step sizes. In some case you get better results with longer steps. Testing = knowing.




Posted by
Zorba777


Users avatar

Posts
67
Registered at
2020-06-06 08:22:54
2020-10-28 10:01:56 - Re: qtVlm thread
@Satori On the topic of NMEA failing to connect. I have had it a few times, but not nearly as often as you report.
Up to know I have always fixed it by closing both AGL and qtVLM. Then first restart AGL and wait until it has properly connected. You can see when it has connected to server. Can take as much as 30 seconds.

Then I restart qtVLM and it always connects to NMEA very quickly.

One thing you may want to check. Click on the boat in top-right in qtVLM to open a bunch of tabs. There is a tab for NMEA and there you can change the "update interval". Mine is set to 3 seconds. You may test and see if other values solve your problems. May too often can cause a bottleneck. Or too infrequent may cause connection loss. Just try.
Posted by
Dingo


Users avatar

Posts
94
Registered at
2013-03-09 04:23:58
2020-12-10 09:59:40 - A QtVlm beginners tutorial
Attached is the gist of the email I sent to Satori who has indicated he will tidy it up and post it somewhere when he has the chance. Meanwhile, this might help get a few more SOLers into QtVlm and routing in a fairly simple way with instructions which follow the normal sequence of routing using QtVlm for SOLing.

I'll monitor for queries and suggestions and try to incorporate what I can into the tutorial as time permits.

Attachments
Posted by
Dingo


Users avatar

Posts
94
Registered at
2013-03-09 04:23:58
2020-12-10 11:08:45 - Re: qtVlm thread
One configuration setting which is useful to adjust is under the advanced tab. There you can adjust the amount of detail shown in coastlines. For more detailed routes near land it could be useful to raise the level of detail.
Posted by
RainbowChaser


Users avatar

Posts
2656
Registered at
2009-06-14 09:44:50
2020-12-18 17:56:44 - Re: qtVlm thread
Dingo - would you be happy for me to include that as a QtVLM Quick Guide under the Links tab?
Posted by
Henrys


Users avatar

Posts
4
Registered at
2010-03-07 13:33:35
2020-12-21 11:39:24 - Re: qtVlm thread
Hi Dingo or anyone for that matter. Question...How do you copy a Location from qt to enter into aGages Optimum Angles Tool to work out the best VMC?
Posted by
Jawz


Users avatar

Posts
154
Registered at
2009-07-21 09:51:19
2021-01-02 13:48:06 - Re: qtVlm thread
I have worked it out. The coords must be decimal and without the degrees symbols. Set this up in settings. Otherwise its the same almost. Alt and click then there is a box that opens up. Copy the coords into Agages tool and remove the symbols and off you go!
Posted by
Silvarius


Users avatar

Posts
3
Registered at
2020-05-09 13:50:09
2021-01-25 21:24:01 - Re: qtVlm thread
Hello,

I'm new to SOL and I am trying to connect the game to qtVlm ... with some difficulties :-)

I am using the brainaid proxy server to export NMEA data to qtVlm. The server is properly running and qtVlm receives now a NMEA feed (NMEA raw data window shows it).

The brainaid server receives data from a boat that is sailing in the "Shetland race 2021".

The problem is that nothing happens on the screen. The race WP are not shown, my boat is not positioned and all instrument are inactive.

Once qtVlm receives properly the NMEA feed, is there any other setting that is to be activated so that the feed can be processed concretly? Or maybe the feed itself doesn't contain the proper data?

Has anyone of you already had this kind of problem in the past?
Attachments

Page: First Previous 27 28 29 30 31 32 33 Next

Please login to post a reply.

Races

Next Race: 00d 00h 00m

Current Races:

Regata dell’Accademia Navale 2025

Welcome to Sailonline’s first partnership with the City of Livorno, in cooperation with the local yacht clubs and the Italian Navy, to offer you the online opportunity to race the Regata dell’Accademia Navale. 630nm in length, starting and finishing in Livorno, the race takes you the length and breadth of the Tyrrhenian Sea via Porto Cervo and Capri. Online, you will be sailing a Class 40, which should keep you well in with the top of the real-life fleet which we will be tracking on screen!
Race #1902
INFO by brainaid.de
Class 40 PARTICULARS
WX Updates:
0430 / 1030 / 1630 / 2230
Ranking: SYC
Race starts: Apr 26th 10:00 Registration Open!

▶ Flash
GO TO RACE

Gulf of St Lawrence 2025


The Gulf of St. Lawrence, with one of the largest and deepest estuaries in the world, will be the site of a completely new race in SOL. Our Melges 40 will take us 950 nm from Bathurst in Baie des Chaleurs around the islands of Anticosti, Pelee and Prince Edward admiring beautiful landscapes along the way. Fair winds.
Race #1910
INFO from brainaid.de
Melges 40 PARTICULARS
WX Updates:
0430 / 1030 / 1630 / 2230
Ranking:
ARQ2 - ARCH - SUPSOL – SYC
Race starts: Apr 21st 17:00 Registration Open!
▶ Flash
GO TO RACE

Transat à Deux 2025

Above you see a single-handed sailor semi-foiling his Beneteau Figaro III to the horizon. It is in fact Ireland’s Sailor of the Year and the overall winner of last year’s Solitaire du Figaro, Tom Dolan. Somehow, we got our hands on a polar for the Class, and rather than trying to surreptitiously track Tom and his mates in the 2025 edition of the Solitaire, sailing rather-short, single-handed legs across the Celtic Sea and Biscay, we thought we’d see how our virtual craft would fare on the Class’s double-handed 3900nm Trans-Atlantic, from somewhere in Brittanny to somewhere in the Caribbean via somewhere in the Canaries. Allez, mes braves!
Race #1901
INFOby brainaid.de
Figaro III foil PARTICULARS
WX Updates:
0430 / 1030 / 1630 / 2230
Ranking: SYC
Race starts: Apr 20th 11:00 Registration Open!
▶ Flash
GO TO RACE

Gladstone Ports Corporation Brisbane to Gladstone Yacht Race 2025


Sailonline is thrilled to partner with the Queensland Cruising Yacht Club for the 2025 Gladstone Ports Corporation Brisbane to Gladstone Yacht Race. This 308 nautical mile offshore classic takes our fleet from Brisbane to Gladstone along Australia's stunning east coast. Racing in high-performance Cookson 50s, SOLers will face shifting winds and tactical decisions at every turn. It’s time to test your skills in one of Australia’s most iconic yacht races. See you on the start line!
Race #1904
INFO by brainaid.de
Cookson 50 PARTICULARS
WX Updates:
0430 / 1030 / 1630 / 2230
Ranking: SYC
RACE CLOSE: Wednesday,
April 23 at 2300 UTC.
Race starts: Apr 18th 01:00 Registration Open!
▶ Flash
GO TO RACE

Bahamas and Back TIMED Race 2025

Welcome to sunny South Florida for this race that has us crossing the Gulf Stream twice. We depart from Palm Beach for a short run over to Freeport, Bahamas then it’s on to Miami before heading to the finish line back in Palm Beach. This is a TIMED race, so you may RE-REGISTER HERE to try again, after finishing a run. You will have 13 days and 11 hours to test your skill and decision making after the race opens.
Race #1911
INFO by brainaid.de
Santa Cruz 70 PARTICULARS
WX Updates:
0430 / 1030 / 1630 / 2230
Ranking:
TRQ2 - TRCH - SUPSOL - SYC
RACE CLOSE: Saturday,
26 April at 23:00 UTC
Race starts: Apr 13th 12:00 Registration Open!
▶ Flash
GO TO RACE

Sinbad by Balloon 2025 - Toamasina to Baia de l'Oiseau


You may recall that when last we visited Madagascar in the company of Sinbad, the Sultan commanded our intrepid inspirator to seek out fabled islands where in Summer the sun barely set. We did and we returned but the Sultan wasn’t happy with Sinbad’s report, so here we go again, now by SOL Balloon instead of sailing vessel. Expect to be in the air for at least 2100nm and depending on how the wind brings us, anything between two weeks and two months before we shall descend at the Sultan’s given coordinates!
Race #1884
INFOby brainaid.de
SOL Balloon PARTICULARS
WX Updates:
0430 / 1030 / 1630 / 2230
Ranking: SYC - SBB
Race starts: Apr 09th 11:00 Registration Closed
▶ Flash
GO TO RACE

Valparaiso to San Francisco 2025

Get ready for an exhilarating new challenge as we set sail on the fourth leg of the 2025 Ocean Championship Series! Following in the 19th century footsteps of Isabel Allende's heroine, Eliza Sommers, 'Daughter of Fortune', this all-new route takes us across the vast eastern Pacific, from Valparaíso, Chile, to San Francisco, California - a 3500nm journey of endurance, strategy, and pure sailing adrenaline. This leg will be raced aboard the powerful Rapido 60, pushing sailors to their limits as they navigate the open ocean. Do you have what it takes to conquer the Pacific? Join us and put your skills to the ultimate test!
PRIZE: SMPF
Race #1900
INFO by brainaid.de
Rapido 60 PARTICULARS
WX Updates:
0430 / 1030 / 1630 / 2230
Ranking: OCQ2 - OCCH - SUPSOL - SYC
Race starts: Apr 07th 11:00 Registration Closed
▶ Flash
GO TO RACE

Melbourne Osaka Cup Double-Handed Yacht Race 2025

Welcome once again to what these days is Sailonline’s almost annual virtual Melbourne to Osaka Yacht Race. In real life, this double-handed 5500 nm race between these two sister cities, one deep in the southern hemisphere, the other high in the northern hemisphere, is run every four to five years, and this year is such a year. So, this year’s online version is in sync with the Melbourne Osaka Cup 2025 organised by the Ocean Racing Club of Victoria (ORCV), and the Sandringham (SYC) and Osaka Hokko (OHYC) yacht clubs. We’ll be racing the well-known First 40, a popular size of boat which should be a good match for many of the boats entered in the real race. With the doldrums unavoidably lying across our course, you can expect to be at virtual sea for at least a month!
Race #1669
INFO by brainaid.de
First 40 Particulars
WX Updates:
0430 / 1030 / 1630 / 2230
Ranking: SYC
RACE CLOSE: Wednesday,
April 23 at 2300 UTC.
Race starts: Mar 16th 06:00 Registration Closed

▶ Flash
GO TO RACE

Go to race archive

SYC Ranking

  1. Sailonline Yacht Club Member WRmirekd
  2. Sailonline Yacht Club Member Patrick70119
  3. Sailonline Yacht Club Member KaSToR
  4. Sailonline Yacht Club Member CriticalHippo
  5. Sailonline Yacht Club Member vida
  6. Sailonline Yacht Club Member FreyjaUSA
  7. Sailonline Yacht Club Member rafa
  8. Sailonline Yacht Club Member Kipper1258
  9. Sailonline Yacht Club Member bonknhoot
  10. Sailonline Yacht Club Member rumskib

View full list

Series

Mobile Client

SYC members have the benefit of access to our mobile/lightweight web client!

The mobile client